32 Installation Guide (AA-RSTZF-TE, November 2005)

Using the HAFM Basic interface82

The Date Time view is displayed (Figure 48).

Figure 48 Date Time view

a. Click the Date boxes that require change, and enter numbers in the following ranges:

Month (MM): 1 through 12

Day (DD): 1 through 31

Year (YYYY): greater than 1980

b. Click the Time boxes that require change, and enter numbers in the following ranges:

Hour (HH): 0 through 23

Minute (MM): 0 through 59

Second (SS): 0 through 59

2. Click OK to save the information.

The following message is displayed.

Your changes have been successfully activated

Configuring Edge Switch parameters

Perform this procedure to configure the following Edge Switch and fabric operating parameters:

Buffer-to-Buffer Credit (BB_Credit), Error Detect Time Out Value (E_D_TOV), Resource Allocation

Time Out Value (R_A_TOV), preferred domain ID and switch priority.

To configure Edge Switch parameters:

1. Set the Edge Switch offline (see ”Setting the Edge Switch offline and online” on page 77).

2. Select Configure > Switch > Parameters.