32 Installation Guide (AA-RSTZF-TE, November 2005)

Edge Switch 2/32 installation guide 97

NOTE: If you want to create a user account, see the HAFM Basic user guide for instructions. Before

you create a new user, you should review information on the security features provided with

SANtegrity and RADIUS servers, including authentication for the various interfaces such as web

(HTTP), CLI, serial port, E_Port, N_Port, and OSMS.

Configuring port binding

Perform this procedure to configure Fibre Channel port binding by WWN.

1. Click Security > Port Binding.

The Port Binding view is displayed (Figure 57).

Figure 57 Port Binding view

2. Select or clear the Port Binding check box to enable or disable port binding for a specified port.

Default is disabled.

3. Identify the WWN to which the port is bound using one of the following methods:

• Enter the WWN to which the port is to bind in the Bound WWN column.

The WWN must be entered as hex digits, all uppercase, and you must use a colon to

separate digits.

• Select or clear the the Attached check box.