Upgrade Instructions hp StorageWorks Edge Switch 2/32 Flexport Third Edition (September 2004) Part Number: AA–RS33E–TE/958–000291–003 These instructions describe how to install the 8-flexport upgrade kit in an Edge Switch 2/32.
© Copyright 2002-2004 Hewlett-Packard Development Company, L.P. Hewlett-Packard Company makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
Contents Contents About this Guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Intended Audience . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Related Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents 4 Edge Switch 2/32 Flexport Upgrade Instructions
About This Guide About this Guide These flexport upgrade instructions provide information to help you: ■ Install the 8-flexport upgrade for the HP StorageWorks Edge Switch 2/32. About thiskit Guide ■ Obtain and configure a required feature key.
About this Guide Overview This section covers the following topics: ■ Intended Audience ■ Related Documentation Intended Audience This book is intended for use by administrators who are experienced with the following: ■ Fibre Channel technology ■ HP StorageWorks Fibre Channel switches Related Documentation For a list of corresponding documentation, see the Related Documents section of the HP StorageWorks Edge Switch 2/32 Release Notes.
About this Guide Conventions Conventions consist of the following: ■ Document Conventions ■ Text Symbols ■ Equipment Symbols Document Conventions This document follows the conventions in Table 1.
About this Guide Tip: Text in a tip provides additional help to readers by providing nonessential or optional techniques, procedures, or shortcuts. Note: Text set off in this manner presents commentary, sidelights, or interesting points of information. Equipment Symbols The following equipment symbols may be found on hardware for which this guide pertains.
About this Guide Power supplies or systems marked with these symbols indicate the presence of multiple sources of power. WARNING: To reduce the risk of personal injury from electrical shock, remove all power cords to completely disconnect power from the power supplies and systems. Any product or assembly marked with these symbols indicates that the component exceeds the recommended weight for one individual to handle safely.
About this Guide Getting Help If you still have a question after reading this guide, contact an HP authorized service provider or access our web site: http://www.hp.com. HP Technical Support Telephone numbers for worldwide technical support are listed on the following HP web site: http://www.hp.com/support/. From this web site, select the country of origin. Note: For continuous quality improvement, calls may be recorded or monitored.
Flexport Upgrade Instructions 1 Read these instructions to upgrade the Edge Switch 2/32 from 16 ports to 24 ports and from 24 ports to 32 ports by installing the 8-flexport upgrade kit for the Edge Switch 2/32. Each port expansion kit includes eight small form factor pluggable (SFP) transceivers, these upgrade instructions, and a transaction code for obtaining a software license key (feature key).
Flexport Upgrade Instructions Unpacking and Inspecting the Optics Unpack and inspect the optics as follows: 12 ■ Inspect the shipping container for damage caused during transit. If a container is damaged, ensure that a representative from the freight carrier is present when the container is opened. ■ Unpack the shipping container and inspect each item for damage. Ensure that all items listed on the enclosed bill of materials are included in the container.
Flexport Upgrade Instructions Upgrading the Edge Switch 2/32 This section describes how to upgrade the Edge Switch 2/32 from 16 ports to 24 ports and from 24 ports to 32. Upgrading to 24 Ports Ports 0 through 15 of the Edge Switch 2/32 are populated when you receive it (Figure 1, reference 3). To upgrade to 24 ports: 1. Insert 8 new SFP transceivers into ports 16 through 23 (Figure 1, reference 2). 2. If you have no additional ports to upgrade, go to “Obtaining and Configuring Feature Keys” on page 14.
Flexport Upgrade Instructions Obtaining and Configuring Feature Keys In order to configure the ports you have added, you need to obtain and configure a feature key. The following sections tell you how to obtain and configure the key. Obtaining Feature Keys To obtain the feature key for your flexport upgrade, complete the information requested on the HP StorageWorks Fibre Channel Switches Entitlement Certificate for firmware features. This certificate is included in the flexport upgrade kit.
Flexport Upgrade Instructions Configuring the Feature Key A feature key is an alphanumeric string consisting of both uppercase and lowercase characters. The following is an example of a feature key format: XxXx-XXxX-xxXX-xX The total number of characters may vary. The key is case sensitive and must be entered exactly as shown in the previous example, including the dashes. The following procedure tells you how to configure the feature key using HAFM.
Flexport Upgrade Instructions Figure 4: Enable Feature Key dialog box The Enable Feature Key dialog box contains a warning, stating that this action will override the current set of features on the switch. If features are enabled on the switch, they will be listed in the Current Features column on the left. The features that come with the new feature key are listed in the New Features column on the right.
