32 Installation Guide (AA-RSTZD-TE, July 2004)

Using the Embedded Web Server

110 Edge Switch 2/32 Installation Guide

Set Fabric Parameters

The switch must be set offline to configure fabric parameters. To configure the

parameters:

1. Set the switch offline as follows:

a. At the View window, select Operations at the left side of the panel. The

Operations panel opens with the Switch Beacon page displayed.

b. At the Current State window, click Set Offline. The message Your

operations changes have been successfully

activated displays.

2. At the View window, select Configure at the left side of the panel. The

Configure panel opens with the Ports page displayed.

3. At the Configure panel, click the Switch tab, then select Fabric Parameters.

The Switch page displays with Fabric Parameters (Figure 46).

Figure 46: Switch page—Fabric Parameters tab

4. Set the fabric parameters:

a. At the BB_Credit field, enter a value from 1 through 60 buffers. The

default is 16. Use a value of 60 buffers only for extended distance port

operation.

b. At the R_A_TOV field, enter a value from 10 through 1200 tenths of a

second (one through 120 seconds). The default is 10 seconds (100 tenths).