32 Installation Guide (AA-RSTZD-TE, July 2004)

Using the Embedded Web Server

113Edge Switch 2/32 Installation Guide

b. At the Subnet Mask field, enter the new value as specified by the

customer’s network administrator (default is 255.0.0.0).

c. At the Gateway Address field, enter the new value as specified by the

customer’s network administrator (default is 0.0.0.0).

3. Click Activate to save the information. The following message box displays

(Figure 48).

Figure 48: Network configuration changes activated

4. Update the address resolution protocol (ARP) table for the browser PC.

a. Choose File >Exit to close the Embedded Web Server and browser

applications. The Windows desktop displays.

b. Choose Start > Programs > Command Prompt. A disk operating

system (DOS) window displays.

c. Delete the switch’s old IP address from the ARP table. At the command

(C:\) prompt, enter arp —d xxx.xxx.xxx.xxx, where

xxx.xxx.xxx.xxx is the old IP address for the switch.

d. Click close (X) at the upper right corner of the DOS window to close the

window and return to the Windows desktop.

5. At the PC, launch the browser application (Netscape Navigator

or Internet

Explorer).

6. At the browser, enter the switch’s new IP address as the Internet URL. The

Username and Password Required dialog box displays.

7. Enter the default user name and password.