32 Installation Guide (AA-RSTZD-TE, July 2004)

Manage Firmware Versions

134 Edge Switch 2/32 Installation Guide

Restore the Configuration

To restore the switch configuration file from the management appliance:

1. Notify the customer the switch is to be set offline. Ensure that the customer’s

system administrator quiesces Fibre Channel frame traffic through the switch

and sets attached FC-AL devices offline.

2. Set the switch offline. For instructions, refer to “Set the Switch Offline” on

page 62.

3. At the HAFM appliance, open the HAFM application.

4. At the HAFM application’s physical map, right-click the product icon

representing the switch for which a configuration file is to be restored, then

select Element Manager from the pop-up menu. The application opens.

5. Select the Backup & Restore Configuration option from the Maintenance

menu. The Backup and Restore Configuration dialog box displays.

6. Click Restore. A Warning dialog box displays, indicating the existing

configuration file is to be overwritten.

7. Click Yes. A Restore dialog box displays, indicating the restore operation is

in progress.

8. When the operation finishes, the Restore dialog box displays a Restore

complete message. Click Close to close the dialog box.