FW V06.XX/HAFM SW V08.02.00 HP StorageWorks Edge Switch 2/32 Installation Guide (AA-RSTZD-TE, July 2004)

Introduction
25Edge Switch 2/32 Installation Guide
Hardware Components
The switch provides a modular design that enables quick removal and
replacement of FRUs—small form factor pluggable SFP optical transceivers,
power supplies, and fans. This section describes the Edge Switch 2/32 main
components.
Front View
Figure 1 shows the front of the Edge Switch 2/32 and identifies the front panel
components.
Figure 1: Edge Switch 2/32 (front view)
Rear View
Figure 2 shows the rear of the Edge Switch 2/32. The FRUs on the rear panel
include two power supplies and four individual cooling fan FRUs. Also shown on
the rear panel is an RS-232 maintenance port (not labeled).
1 Initial machine load (IML) button
2 Ethernet LAN connector
3 SFP fiber-optic connectors
4 Port LEDs
5 Error LED (amber)
6 Power LED (green)
PWR
ERR
1
0246810121416182022
24
262830
35791113151719212325272931
10/100
IML
1
1
2
3
5
6
StorageWorks edge switch 2/32
4