32 Installation Guide (AA-RSTZD-TE, July 2004)

Installing and Configuring the Edge Switch 2/32

77Edge Switch 2/32 Installation Guide

this WWN or nickname will have exclusive attachment to the port if

WWN Binding is enabled. If a valid WWN or nickname is not entered in

this field, but the WWN Binding check box is checked (enabled), then no

devices can connect to the port. If you enter a WWN or nickname in this

field and do not place a check in the WWN Binding check box, the

WWN or nickname will be stored, and all devices can connect to the port.

2. Use the vertical scroll bar as necessary to display additional port information

rows (up to 64 ports).

3. Click Activate to save the configuration information and close the dialog box.

Configure Port Addresses (FICON)

If the switch is set to FICON management style, perform this procedure to access

the switch matrix and define Fibre Channel port names, configure ports as blocked

or unblocked, and define the CUP name. For instructions on configuring port

addresses, refer to the HP StorageWorks Edge Switch 2/32 Element Manager User

Guide for details.

Configure SNMP Trap Message Recipients

Perform this procedure to configure community names, write authorizations, and

network addresses for up to 12 SNMP trap message recipients per HAFM

appliance or up to 6 SNMP trap message recipients per switch. A trap recipient is

a management workstation that receives notification (through SNMP) if a switch

event occurs.