32 Installation Guide (AA-RSTZD-TE, July 2004)

Installing and Configuring the Edge Switch 2/32

79Edge Switch 2/32 Installation Guide

Configure, Enable, and Test E-mail Notification

Perform this procedure to configure, enable, and test e-mail and simple mail

transfer protocol (SMTP) addresses to receive notification of switch (and other

product) events. Configure and test procedures are performed at the HAFM

appliance. E-mail notification is enabled for each switch at the HAFM

application.

To configure, enable, and test e-mail server addresses:

1. Minimize the Hardware View and return to the HAFM application.

2. At the HAFM application or EWS main window, choose Monitor > Event

Notification and E-mail options. The E-mail Event Notification Setup dialog

box displays (Figure 26).

Figure 26: Configure E-Mail dialog box

3. Enter the IP address or DNS host name of the SMTP server in the E-mail

Server field. Use 64 or fewer alphanumeric characters. It is recommended the

IP address be used.

4. Enter the e-mail address to which e-mail replies should be sent in the Reply

field.

5. At the Interval field, enter the length of time the application should wait

between notifications. Choose seconds, minutes, or hours from the associated

drop-down list.

6. To specify users that are to receive e-mail notification, click User List. The

HAFM 8 Server Users dialog box displays, as shown in Figure 27.