32 Installation Guide (AA-RSTZD-TE, July 2004)

Installing and Configuring the Edge Switch 2/32

81Edge Switch 2/32 Installation Guide

13. Click OK to save the information and close the Email Event Notification

Setup dialog box.

14. Maximize the Hardware View (Element Manager).

15. At the Hardware View, choose Maintenance > Enable E-Mail Notification.

A check mark displays in the check box to indicate e-mail notification for the

director is enabled, and the menu closes.

Note: Using HAFM, enable or disable e-mail event notification for each director

individually.

Configure and Enable Call-Home Features

There are two call-home features available, and only one is installed when the

HAFM application is installed on the HAFM appliance. To learn more about

configuring Call-Home features, refer to the HP StorageWorks HA-Fabric

Manager Appliance Installation Guide.

Configure and Enable Ethernet Events

Perform this procedure to configure and enable Ethernet events. An Ethernet event

is recorded (after a user-specified time interval) when the switch-to-HAFM

appliance communication link drops. To configure and enable Ethernet events:

1. Minimize the Hardware View and return to the HAFM application.

2. At the HAFM or EWS main window, select the Monitor > Ethernet Event.

The Configure Ethernet Events dialog box displays (Figure 29).

Figure 29: Configure Ethernet Events dialog box

3. Click the Enable Ethernet Events check box. A check mark displays in the

check box to indicate Ethernet events are enabled.

4. Enter a value from 10 through 120 minutes in the Ethernet Timeout field.