32 Installation Guide (AA-RSTZD-TE, July 2004)

Installing and Configuring the Edge Switch 2/32

82 Edge Switch 2/32 Installation Guide

5. Click OK to close the dialog box.

Configure, Enable, and Test Call Home Event Notification

Telephone numbers and other information for the call-home feature are

configured through the Windows 2000 dial-up networking application. Refer to

“Configure and Enable Call-Home Features” on page 81 for configuration

information. To configure, enable, and test call- home event notification:

1. Minimize the Hardware View and return to the HAFM application.

2. At the HAFM or EWS main window, select the Event Notification and Call

Home options from the Monitor menu. The Call Home Event Notification

Setup dialog box displays (Figure 30).

Figure 30: Call Home Event Notification Setup dialog box

3. Click the Enable Call Home Event Notification check box. A check mark

displays in the check box to indicate call-home event notification is enabled.

Note: The enable function must also be activated for each switch through the Element

Manager application. Call-home event notification can be active for some switches

and inactive for others.

4. Click Send Test. A call-home test message is sent.

5. Click OK to close the dialog box.

6. Maximize the Hardware View page.

7. At the Hardware View, select Enable Call Home Notification from the

Maintenance menu. A check mark appears in the check box to indicate

call-home event notification for the switch is enabled, and the menu closes.