32 Installation Guide (AA-RSTZD-TE, July 2004)

Installing and Configuring the Edge Switch 2/32

84 Edge Switch 2/32 Installation Guide

Create New Alerts

1. At the Hardware View page, choose Configure > Threshold Alerts. The

Configure Threshold Alerts dialog box displays, as shown in Figure 31.

Note: If alerts are configured, they will display in table format showing the name of

the alert, type of alert (Rx, Tx, or Rx or Tx), and alert state (inactive or active).

Figure 31: Configure Threshold Alerts dialog box

2. Click New. The New Threshold Alert dialog box displays, as shown in

Figure 32.