32 Installation Guide (AA-RSTZD-TE, July 2004)

Installing and Configuring the Edge Switch 2/32

90 Edge Switch 2/32 Installation Guide

Delete Alerts

Use the following steps to delete existing threshold alerts:

1. At the Hardware View page, choose Configure > Threshold Alerts. The

Configure Threshold Alerts dialog box displays.

2. Select the alert that you want to delete by selecting the alert information in the

table and click Delete. A message displays asking you to confirm the deletion.

3. Click Yes. The alert is removed from the dialog box.

Test Remote Notification

If the call-home and e-mail notification features are enabled, set up the HAFM

application to test these remote notification features. Because the features are

configured at the HAFM application, call-home and e-mail notification are

enabled for multiple switches or HP managed products. To test remote

notification:

1. Close the Hardware View page for the switch and return to the Product

View page by closing the window.

2. Choose Maintenance > Test Remote Notification. The Test Remote

Notification dialog box displays (Figure 37).

Figure 37: Test Remote Notification dialog box

3. Choose Enable Call Home Event Notification to perform applicable tests.

The call home test provides a test notification message to a remote support

center. Depending on the option chosen during HAFM installation, the test

notification message is transmitted over telephone lines or LAN.

4. Click Send Test. Call-home and e-mail test messages are transmitted. Click

OK to close the dialog box.

5. Maximize the Hardware View.