32 Installation Guide (AA-RSTZD-TE, July 2004)

Installing and Configuring the Edge Switch 2/32

91Edge Switch 2/32 Installation Guide

6. At the Hardware View, select Enable Call Home Notification from the

Maintenance menu. A check mark displays a check box to indicate call-home

event notification for the switch is enabled, and the menu closes.

Back Up HAFM Configuration Data

It is important to back up the HAFM configuration data. This data is used to

restore the HAFM appliance operating environment in case of hard drive failure.

Refer to the HP StorageWorks HA-Fabric Manager Appliance Installation Guide

for instructions on backing up the HAFM configuration data.

Once the HAFM configuration data is backed up, go to “Connect Cables to Fibre

Channel Ports” on page 92.

Configure Open Systems Management Appliance

For complete procedures on configuring this optional feature, refer to HP

StorageWorks Edge Switch 2/32 Element Manager User Guide.

Configure FICON Management Appliance

For complete procedures on configuring this optional feature, refer to HP

StorageWorks Edge Switch 2/32 Element Manager User Guide.

Configure Feature Key

For complete procedures on configuring this feature, refer to HP StorageWorks

Edge Switch 2/32 Element Manager User Guide.

Configure Open Trunking

This option is only available if the optional Open Trunking feature is installed.

Choosing this option opens the Configure Open Trunking dialog box. For

details on enabling Open Trunking and configuring such parameters as congestion

thresholds for ports, event notification options, and low BB credit threshold, refer

to the HP StorageWorks Edge Switch 2/32 Element Manager User Guide.