32 Installation Guide (AA-RSTZD-TE, July 2004)

Installing and Configuring the Edge Switch 2/32

93Edge Switch 2/32 Installation Guide

Connect the Switch to a Fabric

To provide Fibre Channel connectivity between public devices and

fabric-attached devices, connect the switch to an expansion port (E_Port) of an

HP director or switch. The switch port to switch port connection is called an

interswitch link (ISL). To fabric-attach the switch and create an ISL:

1. Ensure that the switch is defined to the HAFM application or defined to the

HAFM appliance (defined while performing “Enabling HAFM to Manage the

Switch” on page 56).

2. Ensure that the preferred domain ID for the switch is unique and does not

conflict with the ID of another switch or director participating in the fabric.

To change the domain ID, see “Configure Switch Operating Parameters” on

page 65.

■ If the domain ID must be changed from the HAFM interface, see

“Configure Switch Operating Parameters” on page 65.

■ If the domain ID must be changed from the Element manager, see

“Configure Switch Parameters” on page 108.

3. Ensure that the R_A_TOV and E_D_TOV values for the switch are identical

to the values for all switches participating in the fabric. To change the values,

see “Configure Fabric Operating Parameters” on page 68.

4. Route a multimode or single mode fiber-optic cable (depending on the type of

SFP transceiver installed) from a customer-specified E_Port of the switch to

the switch.

5. Connect the switch-attached fiber-optic cable to the port SFP transceiver.

6. If the switch is managed by an attached HAFM appliance, go to step 7. If the

switch is managed by the Embedded Web Server interface:

a. Choose View at the left side of the window. The View window opens

with the Switch tab selected and displayed.

b. At the View window, click the Port Properties tab. The Port Properties

page displays with 0 selected, and port information listed for port 0.

c. Choose the port number of the port used to make this ISL connection.

d. Ensure that the Operational State field displays Online and the Reason

field displays N/A or is blank. If an ISL segmentation or other problem is

indicated, refer to the HP StorageWorks Edge Switch 2/32 Service

Manual to isolate the problem. If no problems are indicated, installation

tasks are complete.