32 Installation Guide (AA-RSTZD-TE, July 2004)

Installing and Configuring the Edge Switch 2/32

94 Edge Switch 2/32 Installation Guide

7. At the HAFM appliance’s Product View page, double-click the switch icon.

The Hardware View page for the selected switch displays.

8. Double-click the port connector used to make this ISL connection to open the

Port Properties dialog box (Figure 38).

Figure 38: Port Properties dialog box

9. Ensure that the Link Incident field displays None and the Reason field is

blank. If an ISL segmentation or other problem is indicated, refer to the HP

StorageWorks Edge Switch 2/32 Service Manual to isolate the problem. If no

problems are indicated, installation tasks are complete.

Note: If the Open Trunking feature is installed, an additional field (Congested

Threshold %) displays in the Port Properties dialog box. This field displays the active

congested threshold percentage currently configured in the Configure Open Trunking

dialog box.