32 Installation Guide (AA-RSTZD-TE, July 2004)

Installing and Configuring the Edge Switch 2/32

96 Edge Switch 2/32 Installation Guide

Using HAFM from a Remote Location

Use this section to install the HAFM client on a remote workstation.

Remote Workstation Minimum Requirements

The following minimum requirements must be met in order to install HAFM on a

remote workstation.

Note: In order for HAFM to function properly, compatible versions must be installed

on both the client machines and the HAFM appliance.

■ Desktop or notebook PC with color monitor, keyboard, and mouse, using an

Intel III processor with a 700 MHz or greater clock speed, and using the

Microsoft Windows 95, Windows 2000 (with Service Pack 4), Windows XP,

Windows NT 4.0 (with Service Pack 6a), or Windows Server 2003.

■ Unix workstation with color monitor, keyboard, and mouse, using a:

— Linux-based system using an Intel Pentium III processor with 1 GHZ or

greater clock speed, using Red Hat

7.3 or higher operating system.

— Hewlett-Packard HA PA-RISC processor with a 400 MHz or greater

clock speed, using the HP-UX 11 or higher operating system.

— Sun Microsystems UltraSPARC II processor with a 400 MHz or greater

clock speed, using the SunOS Version 7 or higher operating system.

— IBM Power3-II microprocessor with a 333 MHz or greater clock speed,

using the AIX Version 4.3.3 or higher operating system.

— Linux-based system using an Intel Pentium III processor with 1 GHZ or

greater clock speed, using Red Hat

7.3 or higher operating system.

■ At least 15 MB available on the internal hard drive.

■ 32 MB or greater RAM.

■ Video card supporting 256 colors at 800 x 600 pixel resolution.

■ Ethernet network adapter.

■ Java-enabled Internet browser, such as Microsoft Internet Explorer (Version

4.0 or later) or Netscape Navigator (Version 4.0 or later).