32 Installation Guide (AA-RSTZD-TE, July 2004)

Installing and Configuring the Edge Switch 2/32

97Edge Switch 2/32 Installation Guide

Install HAFM Client on a Remote Workstation

Use these steps to install HAFM on a remote client:

1. Verify that the workstation and the Ethernet LAN segment (with the Edge

Switch 2/32 attached) are connected through the Internet.

2. At the workstation, launch the browser application.

3. At the browser, enter the HAFM appliance IP address.

4. The HAFM splash screen displays with the following options, see Figure 39.

a. Install HAFM remote client application—Choose this option to install

the application for your workstation platform.

b. Download SNMP MIB files—The Management Information Base

(MIB) files are provided in standard ASN.1 syntax and may be installed

into the MIB database of any SNMPv2 compliant Network Management

Station.

Figure 39: HAFM remote client install

5. To install the remote client application, scroll down to the information that

pertains to your platform, and follow the instructions provided.

6. After you have downloaded the installer executable, the InstallAnywhere

Wizard displays. Follow the instructions provided to continue the installation.