32 Service Manual (AA-RS2GD-TE, July 2004)

129Edge Switch 2/24 Service Manual

Repair Information

This chapter describes the repair and repair-related procedures for the HP

StorageWorks Edge Switch 2/32, and associated field-replaceable units (FRUs).

The following procedures are described:

■ Using Log Information, page 131

■ Obtaining Port Diagnostic Information, page 135

■ Swapping Ports (FICON), page 149

■ Collecting Maintenance Data, page 151

■ Clean Fiber-Optic Components, page 153

■ Power-On Procedure, page 154

■ Power-Off Procedure, page 155

■ IML, IPL, or Reset the Switch, page 156

■ Set the Switch Online or Offline, page 159

■ Block and Unblock Ports, page 161

■ Manage Firmware Versions, page 163

■ Manage Configuration Data, page 170

■ Install or Upgrade Software, page 175

Do not perform repairs until a failure is isolated to a FRU. If fault isolation was

not performed, refer to “MAP 0000: Start MAP” on page 29.