32 Service Manual (AA-RS2GD-TE, July 2004)

Repair Information

141Edge Switch 2/24 Service Manual

— Frames too short—Received frames were less than the Fibre Channel

minimum size, indicating the frame arrived at the switch port corrupted.

Frame corruption may be caused by device disconnection, an optical

transceiver failure at the device, a bad fiber-optic cable, or a poor cable

connection.

■ Operational statistics—These entries provide information about port

operation, including:

— Offline sequences received and transmitted.

— Link resets received and transmitted.

— LIPs generated and detected.

■ Traffic statistics—These entries provide information about port traffic,

including:

— Percent link utilization (receive and transmit).

— Fibre Channel frames received and transmitted.

— Four-byte words received and transmitted.

— Flows rerouted to and from ISLs.

Viewing Port Properties

To open the Port Properties dialog box, perform the following:

1. Double-click a port graphic at the Hardware View or a port row at the Port

List View. The Port Properties dialog box displays, as shown in Figure 40.