32 Service Manual (AA-RS2GD-TE, July 2004)

Repair Information

155Edge Switch 2/24 Service Manual

Power-Off Procedure

To power-off the switch:

1. Notify the customer the switch is to be powered off. Ensure the customer’s

system administrator quiesces Fibre Channel frame traffic through the switch

and sets attached devices offline.

2. Set the switch offline (“Set Offline State” on page 160).

3. Turn off both power switches at the rear of the unit. If servicing the switch,

disconnect the power cord(s) from the input power module at the rear of the

switch. This step is not required when performing a power cycle.