FW V06.XX/HAFM SW V08.02.00 HP StorageWorks Edge Switch 2/32 Service Manual (AA-RS2GD-TE, July 2004)

Messages
213Edge Switch 2/24 Service Manual
Cannot enable Open
Trunking while
Enterprise Fabric Mode
is active and the switch is
online.
Enterprise Fabric mode
is active and the switch
is online and user is
attempting to enable
Open Trunking. This
message only displays if
the optional Open
Trunking feature is
installed.
Perform either of the
following steps:
■ Disable Enterprise
Fabric Mode option by
selecting the
appropriate fabric in
the Fabric Tree portion
of the HAFM window
(Fabrics tab) and then
selecting Enterprise
Fabric Mode from the
Fabrics menu. When
the Enterprise Fabric
Mode dialog box
displays, click Start
and follow prompts to
disable the feature.
■ Set the switch offline
through the Set Online
State dialog box.
Display this dialog box
by selecting Set Online
State from the Element
Manager Maintenance
menu.
Cannot have E-Ports if
Management Style is
FICON unless
SANtegrity feature is
installed. Please contact
your sales
representative.
Firmware is below the
required level and you
attempted to change
management style from
Open Systems to FICON
management style with
E_Ports configured, but
SANtegrity Binding is
not installed.
Informational message. If
firmware is below the
required level and you
install SANtegrity Binding
before changing to FICON
management style, then
E_Ports will remain as
E_Ports when you change
to FICON management
style. If SANtegrity Binding
is not installed, setting a
switch to FICON
management style will
change all E_ports to
G_Ports.
Cannot have spaces in
field.
Spaces are not allowed
in this field.
Remove the spaces or
retype the field without
spaces.
Table 25:
Edge Switch 2/32 Element Manager Messages (Continued)
Message Description Action