FW V06.XX/HAFM SW V08.02.00 HP StorageWorks Edge Switch 2/32 Service Manual (AA-RS2GD-TE, July 2004)

Messages
217Edge Switch 2/24 Service Manual
Could not export log to
file.
A file I/O error
occurred. The log file
could not be saved to the
specified destination.
Ensure file name and drive
are correct.
Could not find firmware
file.
Firmware file selected
was not found in the FTP
directory.
Ensure file name and
directory are correct.
Could not find firmware
file.
The selected file is not a
firmware file.
Obtain a valid firmware
file from your service
representative.
Could not remove dump
files from server.
Dump files could not be
removed from server.
Link may be down or
switch may be busy.
Retry the operation later. If
the condition persists,
contact support personnel.
Could not stop port
diagnostics.
Port diagnostics could
not be stopped. Link may
be down or switch may
be busy.
Retry the operation later. If
the condition persists,
contact support personnel.
Could not write firmware
to flash.
Firmware could not be
written to flash memory.
Try again. If problem
persists, contact support
personnel.
CUP name and port
name are identical.
Within the address
configuration, one or
more of the port names
are the same as the CUP
name.
Make sure all names are
unique for the ports and
CUP name.
Date entered is invalid. Date entered incorrectly. Verify that the number of
days in the month is valid.
Device applications
should be terminated
before starting
diagnostics. Press NEXT
to continue.
Device application is not
terminated.
Terminate device
application before running
port diagnostics.
Table 25:
Edge Switch 2/32 Element Manager Messages (Continued)
Message Description Action