FW V06.XX/HAFM SW V08.02.00 HP StorageWorks Edge Switch 2/32 Service Manual (AA-RS2GD-TE, July 2004)

Messages
218 Edge Switch 2/24 Service Manual
[device WWN] cannot
be removed from the
Switch Membership List
while participating in
Switch Binding. The
device must be isolated
from the switch, or
Switch Binding
deactivated before it can
be removed.
User attempted to
remove a device WWN
from the Switch
Membership List
(SANtegrity Binding
feature) while Switch
Binding is enabled.
Remove the device from the
switch by blocking the port,
setting the switch offline, or
disabling Switch Binding
through the Switch Binding
Change State dialog box
before removing devices
form the Switch
Membership List.
Disabling Insistent
Domain ID will disable
Fabric Binding. Do you
want to continue?
Fabric Binding is
enabled through the
HAFM and user
attempted to disable
Insistent Domain ID in
the Configure Switch
Parameters dialog box.
Click Yes if you want to
continue and disable
Fabric Binding.
Disabling Switch Binding
will disable Enterprise
Fabric Mode. Do you
want to continue?
User attempting to
disable Switch Binding
through the Switch
Binding State Change
dialog box, but
Enterprise Fabric Mode
is enabled
Disable Enterprise Fabric
Mode using the Enterprise
Fabric Mode dialog box in
the HAFM before disabling
Switch Binding.
Do you want to continue
with IPL?
Requesting confirmation
to proceed with an IPL.
Click Yes to confirm the IPL
or Cancel to cancel the
operation.
Duplicate community
names require identical
write authorizations.
Duplicate community
names exist that have
conflicting or different
write authorizations.
Verify community names
and whether a community
name is duplicated with
different write
authorizations.
Enterprise Fabric Mode
will be disabled if any of
the following parameters
are disabled: Insistent
Domain ID, Rerouting
Delay, Domain RSCN's.
Do you want to
continue?
User attempted to
disable these parameters
in the Configure Switch
Parameters dialog box
while the Edge Switch
was online, but
Enterprise Fabric Mode
(SANtegrity Binding
feature) is enabled.
Click Yes if you want to
continue, and disable
Enterprise Fabric Mode.
Table 25:
Edge Switch 2/32 Element Manager Messages (Continued)
Message Description Action