FW V06.XX/HAFM SW V08.02.00 HP StorageWorks Edge Switch 2/32 Service Manual (AA-RS2GD-TE, July 2004)

Messages
220 Edge Switch 2/24 Service Manual
Firmware file I/O error. Firmware file
input/output error
occurred.
Contact support personnel.
Firmware file not found. Firmware file deleted
from the HAFM
appliance.
Add firmware to library.
Incompatible
configuration between
management style and
management server.
If the Firmware is below
the required level, only
FICON management
style is allowed if the
FICON Management
Server feature is
enabled. You attempted
to enable Open Systems
management style.
Disable FICON
Management Server,
enable the Open Systems
Management Server, or
enable the Open Systems
management style.
Incorrect product type. When configuring a new
product through the
New Product dialog
box, an incorrect
product was selected for
the network address.
Select the correct product
type for the product with
the network address.
Installing this feature
key, while online, will
cause an IPL operation
on the switch and a
momentary loss of LAN
connection. This
operation is
non-disruptive to the
Fibre Channel traffic. Do
you wish to continue
installing this feature
key?
If the Edge Switch is
online, installing the new
feature key will cause an
internal program load
(IPL). The LAN
connection to the HAFM
appliance will be lost
momentarily, but Fibre
Channel traffic will not
be affected.
Select Yes to install the
feature key or No to not
install.
Internal file transfer error
received from switch.
Switch detected an
internal file transfer
error.
Contact support personnel.
Invalid character in field. Invalid character in the
input field.
Re-enter the field
information.
Invalid configuration
name.
Attempted to save an
address configuration
name with an invalid
name.
Use up to 24 alphanumeric
characters, including
spaces, hyphens and
underscores.
Table 25:
Edge Switch 2/32 Element Manager Messages (Continued)
Message Description Action