FW V06.XX/HAFM SW V08.02.00 HP StorageWorks Edge Switch 2/32 Service Manual (AA-RS2GD-TE, July 2004)

Messages
221Edge Switch 2/24 Service Manual
Invalid feature key. The feature key was not
recognized.
Re-enter the feature key
noting the key is
case-sensitive and to
include the dashes.
Invalid firmware file. Selected file is not a
firmware file.
Select the correct firmware
file.
Invalid HAFM appliance
address.
The IP address specified
for the HAFM appliance
is unknown to the
domain name server
(invalid).
Verify and enter a valid
HAFM appliance IP
address.
Invalid network address. Network address
specified is not known
by the domain name
server.
Check the input address
and specify the correct
network address.
Invalid port number. Port number must be
within the range of ports
for the specific switch
model.
Enter a port number within
the correct range.
Invalid port number.
Valid ports are (0–31).
Port number must be
within the range of ports
for the specific switch
model. For this model,
the valid port numbers
are 0–31.
Enter a port number within
the correct range.
Invalid port swap. Port swap selection is not
allowed.
Ensure that each port
selected for swap has not
been previously swapped.
Invalid response
received from switch.
The switch returned an
invalid response.
Resend the firmware. If the
condition persists, contact
support personnel.
Invalid serial number for
this feature key.
The serial number and
the feature key did not
match.
Ensure that the feature key
being installed is
specifically for this switch
serial number.
Invalid UDP port
number.
UDP port number must
be an integer from 1
through 65535.
Enter a port number from 1
through 65535.
Table 25:
Edge Switch 2/32 Element Manager Messages (Continued)
Message Description Action