958-00291-005, January 2006)

Figure 2 Maintenance Feature Installation tab

7. Enter the feature key in the Feature Key box, and then click Update.

Aconﬁrm

ation page contains a warning that this action will override the current set of features on

the switch.

8. Click OK to acti vate the new feature key.

The swit

ch performs an IPL when the key is activated and the feature key is installed.

NOTE:

When you

select OK, all current features are replaced with new features.

9. Back up the conﬁguration data when you are ﬁnished conﬁguring the switch.

Installing a feature key using HAFM

After obtaining the feature key, install the feature using HAFM as follows:

1. Log in to HAFM and access the H ardware View.

2. If your ﬁrmware is 04.01.02 or later, proceed to step 3.

If your ﬁrmware is earlier than 04.01.02, Select Maintenance > Set Ofﬂ ine State to set the switch

ofﬂine.

The Hardware View is displayed.

3. Select Conﬁgure > Features.

The Conﬁgure Feature Key dialog box is displayed (Figure 3).

Flexport upgrade instructions