HP StorageWorks Data Replication Manager HSG80 ACS Version 8.7P Configuration Guide (AA-RPHZF-TE, March 2004)

Troubleshooting
172 Data Replication Manager HSG80 ACS Version 8.7P Configuration Guide
Figure 29 is the cabling diagram with the port connections from the sw12 switch added. The
additional cabling is drawn from information highlighted in Table 14, which shows that:
■ Port 0 of sw12 is cabled to the HBA whose WWID ends in -F251.
■ Port 4 of sw12 is cabled to port 1 of the bottom controller at the same site.
■ Port 6 of sw12 is cabled to port 2 of the bottom controller at the same site.
■ Port 7 of sw12 is cabled via an ISL to sw11 (compare with port 15 of sw11 in Table 12).
Table 14: Third switchShow Command Output
switchName: sw12
switchType: 2.4
switchState: Online
switchRole: Principal
switchDomain: 0
switchId: fffc40
switchWwn: 10:00:00:60:69:00:54:65
port 0: sw Online F-Port 10:00:00:00:c9:21:f2:51
port 1: -- No_Module
port 2: -- No_Module
port 3: -- No_Module
port 4: -- sw Online F-Port 50:00:1f:e1:00:07:9d:d1
port 5: -- No_Module
port 6: -- sw Online F-Port 50:00:1f:e1:00:07:9d:d2
port 7: -- sw Online E-Port 10:00:00:60:69:10:47:69 “sw11” (downstream)
port 8: -- No_Card
port 9: -- No_Card
port 10: -- No_Card
port 11: -- No_Card
port 12: -- No_Card
port 13: -- No_Card
port 14: -- No_Card
port 15: -- No_Card
value = 16 = 0x10