HSG80 ACS Solution Software V8.6 for Windows NT and Windows 2000 Installation and Configuration Guide

Installing, Configuring, and Removing the Client B–7
Removing the Command Console Client
Before you remove the Command Console Client (CCL) from the computer, remove AES.
This will prevent the system from reporting that a service failed to start every time the
system is restarted. Steps 2 through 5 describe how to remove the CCL.
NOTE: When you remove the CCL, the SWCC2.MDB file is deleted. This file contains the
Navigation Tree configuration. If you want to save this information, move the file to another
directory.
1. Click Start > Programs > Command Prompt and change to the directory to which you
installed the CCL.
2. Enter the following command:
C:\Program Files\Compaq\SWCC> AsyncEventService -remove
3. Do one of the following:
❏ On Windows NT 4.0, click Start > Settings > Control Panel, and double-click the
Add/Remove Programs icon in the Control Panel. The Add/Remove Program
Properties window appears.
❏ On Windows 2000, click Start > Settings > Control Panel > Add/Remove
Programs. The Add/Remove Program window appears.
4. Select Command Console in the window.
5. Do one of the following:
❏ On Windows NT 4.0, click Add/Remove.
❏ On Windows 2000, click Change/Remove.
6. Follow the instructions on the screen.
NOTE: This procedure removes only the Command Console Client (SWCC Navigation Window).
You can remove the HSG80 Client by using the Add/Remove program.