HSG80 ACS Solution Software V8.6 for Windows NT and Windows 2000 Installation and Configuration Guide

Index–6 HSG80 ACS Solution Software Version 8.6 for Windows NT and Windows 2000 Installation and
Configuration Guide
L
labeling LUNs
format utility 3−69
launching
Client 3−19
LOCATE
find devices 2−38
location
cache module 1−2
, 1−3
controller 1−2
, 1−3
logintmo parameter 3−35
LUN IDs
general description 1−32
LUN presentation 1−20
LUNs
creating a filesystem 3−67
creating partitions using disklabel 3−66
labeling 3−69
using format utility 3−69
preparing for use by filesystem 3−66
M
MA6000
connecting to host system 3−8
mail messages
RAIDManager 4−56
maintenance port connection
establishing a local connection 5−2
illustrated 5−2
manual mode
installation 3−64
mapping storagesets 2−29
messages
there is no disk in the drive B−4
mirrored caching
enabling 1−12
illustrated 1−12
mirrorset switches
changing
fabric topology 5−33
mirrorsets
planning considerations 2−16
important points 2−17
switches 2−25
mounting the CD-ROM 3−58
moving storagesets 7−7
mulitple-bus failover
restricting host access by offsets 1−29
multiple-bus failover 1−8
ADD CONNECTIONS command 1−21
ADD UNIT command 1−21
ADD UNITcommand 1−21
CLI configuration procedure
fabric topology 6−5
fabric topology
preferring units 5−30
fabric topology configuration
cabling 5−14
host connections 1−21
restricting host access 1−27
disabling access paths 1−27
SET CONNECTIONS command 1−21
SET UNITcommand 1−21
N
naming convention
arbitrated loop 3−53
fabric device 3−54
NetWare drive
installation 3−33
NetWare volume
configuration 3−36
network port assignments B−3
node IDs 1−30
restoring 1−31
NODE_ID
worldwide name 1−30
NOSAVE_CONFIGURATION 2−28
O
offset
LUN presentation 1−20
restricting host access
multiple-bus fafilover 1−29
transparent fafilover 1−26
SCSI version factor 1−20