HSG80 ACS Solution Software V8.6 for Windows NT and Windows 2000 Installation and Configuration Guide

Preparing the Host System 3–7
4. Open the Properties screen by right-clicking and selecting Properties, once Properties
is open, select the Driver tab.
5. From the Driver screen, select the Update Driver button to begin the Upgrade Device
Driver Wizard.
6. From the second screen of the wizard, select Display a list of the known drivers for this
device so that I can choose a specific driver.
7. In the third screen of the wizard, click the Have Disk button, then the Install From Disk
Box will appear. Select Browse.
8. From Browse, select CD-ROM. Then, from the CD that came with your kit, open the
KGPSA folder.
9. Once the KGPSA folder opens, select the WIN2K folder for OEM set up. Proceed
through the remaining steps of the wizard to complete the driver installation.
Initial Setup Settings
Terms and Definitions
The following terms and definitions will be helpful to understand when making initial set
up choices.
■ SCSI−Data transfer protocol used in computers and storage systems. SCSI-3 is a
superset of SCSI-2.
■ CCL−Command Console LUN, a "SCSI Logical Unit Number" virtual-device used for
communicating with Command Console Graphical User Interface (GUI) software.
■ Failover−The ability for HSG80 controllers to transfer control from one controller to
another in the event of a controller failure. This ensures uninterrupted operation. Use
Transparent Failover mode for single HBA configurations. Use multiple-bus failover
mode for Secure Path based configurations.
■ Fibre Channel−Very high-speed data bus protocol and technology used to connect
computer components. It is what connects the system to your server. Use Arbitrated
Loop mode for hub configurations and Fabric mode for switches.