HP StorageWorks HSG60 and HSG80 Array Controller and Array Controller Software Maintenance and Service Guide (EK-G80MS-SA. C01, March 2005)

Replacing BA370, M2100 & M2200 Enclosure Elements

116 HP StorageWorks HSG60 and HSG80 Array Controller and Array Controller Software

Maintenance and Service Guide

7. Remove the program card ESD cover (see Figure 46) and the program card,

and save them in an antistatic bag or on a grounded antistatic mat for the

replacement controller.

Figure 46: Removing the controller ESD cover

8. Disconnect all host bus cables or terminators from the controller.

Note: Use thin needle nose pliers to disconnect the cables if the extender clips are not

installed on the optical cables.

9. If connected, disconnect the PC or terminal from the controller maintenance

port.

1 Program card slot Eject button

2 Program card

3 ESD cover

5024