HP StorageWorks HSG60 and HSG80 Array Controller and Array Controller Software Maintenance and Service Guide (EK-G80MS-SA. C01, March 2005)

Replacing BA370, M2100 & M2200 Enclosure Elements

159HP StorageWorks HSG60 and HSG80 Array Controller and Array Controller Software

Maintenance and Service Guide

7. Enter Y(es) to confirm the intent to install the PVA module.

8. Set the replacement PVA SCSI ID address:

■ Set to 0 for a master enclosure.

■ Set to 2 for the first expansion enclosure.

■ Set to 3 for the second expansion enclosure.

9. Press Enter or Return.

Caution: Wait for

FRUTIL

to quiesce the device ports—indicated by an All

device ports quiesced message. Failure to allow the ports to quiesce

can result in data loss. Quiescing can take several minutes.

10. Replace the PVA:

a. Disengage both retaining levers on the old PVA (see Figure 65) and

remove the PVA.

Figure 65: PVA module location

Caution: Carefully align the replacement PVA in the appropriate guide rails.

Misaligning the module can damage the backplane.

1 PVA module

CXO7318A