HP StorageWorks HSG60 and HSG80 Array Controller and Array Controller Software Maintenance and Service Guide (EK-G80MS-SA. C01, March 2005)

Common Replacement Information and Procedures
69HP StorageWorks HSG60 and HSG80 Array Controller and Array Controller Software
Maintenance and Service Guide
3. Restart each array controller by pressing the Reset button.
The array controller automatically restart and the subsystem is now ready for
operation.
Tip: If the array controller did not restart, use step a through step c.
a. Press and hold the Reset button.
b. Reseat the array controller program card.
c. Release the Reset button.
4. Restart the host system using host documentation.