HP StorageWorks HSG80 Enterprise Modular Storage RAID Array Fibre Channel Solution Software V8.8 for Novell NetWare Release Notes (AA-RV1NA-TE, March 2005)

Hardware and Software Support
32 HSG80 Enterprise Modular Storage RAID Array Fibre Channel Solution Software V8.8 for Novell
NetWare Release Notes
Secure Path Software
Secure Path is a high availability, multi-bus software application that supports
FC-SW connectivity. This Fibre Channel Solution Software Kit supports the
Secure Path software shown in Table 10.
Table 9: Minimum System Requirements
Component Requirement
Controller
Compatibility
HP StorageWorks HSG80 Array Controller, ACS V8.8-1 (or a
subsequently patched version of ACS V8.8)
Platform Intel and ProLiant X86 Servers
Operating System Novell NetWare V5.1, NetWare Cluster Server V1.01
Novell NetWare V6.0, NetWare Cluster Server V1.6
Novell NetWare V6.5, NetWare Cluster Server V1.7
Topology Fibre Channel Switched (FC-SW)
SCSI Protocol SCSI-2
SCSI-3 (recommended)
Failover Mode Transparent (all supported OS versions)
Multi-Bus (requires Secure Path software)
Host Mode NETWARE
Disk Space 5 MB
Adapter
Compatibility
HP StorageWorks 64-bit, 2Gb PCI-X FC HBA FCA2214
(281541-B21), HBA driver V6.8f, BIOS1.45
HP StorageWorks 32-bit, 1 Gbps PCI FC HBA 223180-B21, HBA
driver CPQFC HAM V2.54, Firmware Version N/A
Note: This HBA is supported on NetWare V5.1 and 6.0 only.
HP StorageWorks 64-bit, 1 Gbps PCI FC HBA 120186-B21, HBA
driver CPQFC HAM V2.54, Firmware Version N/A
Note : This HBA is supported on NetWare V5.1 and 6.0 only.
Table 10: Secure Path Compatibility
Operating System Supported Product Version
NetWare V5.1, V6.0, and V6.5 (HBA
FCA2210/2214)
V3.0C
NetWare V5.1 and V6.0 (HBAs 223180-B21
and 223180-B21)
V3.0B