HP StorageWorks HSG80 ACS Solution Software V8.8 for HP-UX Installation and Configuration Guide (AA-RV1FA-TE, March 2005)

Planning Storage Configurations
101HSG80 ACS Solution Software V8.8 for HP-UX Installation and Configuration Guide
Example Storage Map–Model 4310R Disk Enclosure
Table 11 shows an example of four Model 4310R disk enclosures (single-bus
I/O).
Unit D100 is a 4-member RAID 3/5 storageset named R1. R1 consists of
Disk10000, Disk20000, Disk30000, and Disk40000.
Unit D101 is a 2-member striped mirrorset named S1. S1 consists of M1 and
M2:
M1 is a 2-member mirrorset consisting of Disk10100 and Disk20100.
M2 is a 2-member mirrorset consisting of Disk30100 and Disk40100.
Unit D102 is a 2-member mirrorset named M3. M3 consists of Disk10200 and
Disk20200.
Unit D103 is a 2-member mirrorset named M4. M4 consists of Disk30200 and
Disk40200.
Unit D104 is 3-member stripeset named S2. S2 consists of Disk10300,
Disk20300, and Disk30300.
Unit D105 is a single (JBOD) disk named Disk40300.
Unit D106 is a 3-member RAID 3/5 storageset named R2. R2 consists of
Disk10400, Disk20400, and Disk30400.
Unit D107 is a single (JBOD) disk named Disk40400.
Unit D108 is a 4-member stripeset named S3. S3 consists of Disk10500,
Disk20500, Disk30500, and Disk40500.
Unit D1 is a 2-member striped mirrorset named S4. S4 consists of M4 and
M5:
M5 is a 2-member mirrorset consisting of Disk10800 and Disk20800.
M6 is a 2-member mirrorset consisting of Disk30800 and Disk40800.
Unit D2 is a 4-member RAID 3/5 storageset named R3. R3 consists of
Disk11000, Disk21000, Disk31000, and Disk41000.
Unit D3 is a 4-member stripeset named S5. S5 consists of Disk11100,
Disk21100, Disk31100, and Disk41100.
Unit D4 is a 2-member mirrorset named M7. M7 consists of Disk11200 and
Disk21200.
Disk31200 and Disk41200 are spareset members.