HP StorageWorks HSG80 ACS Solution Software V8.8 for HP-UX Installation and Configuration Guide (AA-RV1FA-TE, March 2005)

Preparing the Host System
117HSG80 ACS Solution Software V8.8 for HP-UX Installation and Configuration Guide
# pvcreate /dev/rdsk/c5t0d1
Physical volume /dev/rdsk/c50d1 has been successfully created.
5. Create the volume group. This is done with the
vgcreate command similar to
the following:
# vgcreate /dev/vg0n /dev/dsk/cntndn
6. If necessary, extend the volume group:
# vgextend /dev/vg0n /dev/dsk/cntndn
/dev/dsk/c5t0d2 /dev/rdsk/c5t0d2
disk 2
8
8/12.8.0.255.4.1.0 sdisk CLAIMED DEVICE DEC HSGCCL
/dev/dsk/c5t1d0 /dev/rdsk/c5t1d0
disk 2
9
8/12.8.0.255.4.1.1 sdisk CLAIMED DEVICE DEC HSG80
/dev/dsk/c5t1d1 /dev/rdsk/c5t1d1
disk 3
0
8/12.8.0.255.4.1.2 sdisk CLAIMED DEVICE DEC HSG80
/dev/dsk/c5t1d2 /dev/rdsk/c5t1d2
disk 2 8/16/5.2.0 sdisk CLAIMED DEVICE TOSHIBA
CD-ROM
XM-401TA
/dev/dsk/c1t2d0 /dev/rdsk/c1t2d0
disk 3 8/16/5.5.0 sdisk CLAIMED DEVICE DEC RZ28M (C)
DEC
/dev/dsk/c1t5d0 /dev/rdsk/c1t5d0
Class I H/W Path Driver S/W State
H/W
Type
Description