HSG80 ACS Solution Software V8.6 for Compaq OpenVMS Installation and Configuration Guide

Index–4 HSG80 ACS Solution Software Version 8.6 for Compaq OpenVMS Installation and Configuration Guide
storage map template 1 A−3
, A−6, A−7, A−9,
A−11, A−12, A−14
functions
Agent 4−1
G
geometry
initialize switches 2−28
H
Host access
restricting in multiple-bus failover mode
disabling access paths 1−16
host access
restricting by offsets
multiple-bus failover 1−17
restricting in multiple-bust failover mode 1−15
host adapter
installation 3−5
preparation 3−5
host connections 1−9
naming 1−9
I
initialize switches
changing
fabric topology 5−26
CHUNKSIZE 2−26
geometry 2−28
NOSAVE_CONFIGURATION 2−28
SAVE_CONFIGURATION 2−28
installation
controller verification 5−9
, 5−15
host adapter 3−5
invalid network port assignments B−3
there is no disk in the drive message B−4
installation verification
CLI commands 5−9
, 5−15
installing
Agent 4−6
, 4−8, 4−10
integrating SWCC B−8
invalid network port assignments B−3
J
JBOD 2−12
L
LOCATE
find devices 2−38
location
cache module 1−2
, 1−3
controller 1−2
, 1−3
LUN IDs
general description 1−20
M
maintenance port connection
establishing a local connection 5−2
illustrated 5−2
mapping storagesets 2−29
messages
there is no disk in the drive B−4
mirrored caching
enabling 1−8
illustrated 1−8
mirrorset switches
changing
fabric topology 5−26
mirrorsets
planning considerations 2−16
important points 2−17
switches 2−25
moving storagesets 8−6
mulitple-bus failover
restricting host access by offsets 1−17
multiple-bus failover 1−5
ADD CONNECTIONS command 1−12
ADD UNIT command 1−12
ADD UNITcommand 1−12
CLI configuration procedure
fabric topology 7−4
fabric topology
preferring units 5−22
fabric topology configuration
cabling 5−10
host connections 1−12