HSG80 ACS Solution Software V8.6 for Compaq OpenVMS Installation and Configuration Guide

Index–6 HSG80 ACS Solution Software Version 8.6 for Compaq OpenVMS Installation and Configuration Guide
request rate 2−26
requirements
host adapter installation 3−5
storage configuration 1−14
restricting host access
disabling access paths
multiple-bus failover 1−16
multiple-bus failover 1−15
running
Agent 4−4
S
SAVE_CONFIGURATION 2−28
saving configuration 2−28
SCSI-2
assigning unit numbers 1−13
command console lun 1−13
SCSI-3
assigning unit numbers 1−13
command console lun 1−13
Second enclosure of multiple-enclosure subsystem
storage map template 2 A−4
selective storage presentation 1−15
SET CONNECTIONS
multiple-bus failover 1−12
SET UNIT
multiple-bus failover 1−12
setting
controller configuration handling 2−28
single disk (JBOD)
assigning a unit number
fabric topology 5−21
Single-enclosure subsystem
storage map template 1
A−3
software
verification 3−5
specifying identifier for a unit
CLI commands 1−14
, 5−21
specifying LUN ID alias
SWCC 1−15
, 5−22
starting
Agent 4−10
, 4−12
stopping
Agent 4−10
, 4−12
storage
creating map 2−29
profile
example A−2
storage map 2−29
Storage map template 1 A−3
first enclosure of multiple-enclosure
subsystem A−3
, A−6, A−7, A−9, A−11,
A−12, A−14
single enclosure subsystem A−3
Storage map template 2 A−4
second enclosure of multiple-enclosure
subsystem A−4
Storage map template 3 A−5
third enclosure of multiple-enclosure
subsystem A−5
storageset
deleting
fabric topology 5−25
fabric topology
changing switches 5−25
planning considerations 2−14
mirrorsets 2−16
partitions 2−22
RAIDsets 2−18
striped mirrorsets 2−20
stripesets 2−14
profile 2−12
example 2−13
profiles A−1
storageset profile 2−12
storageset switches
SET command 2−24
storagesets
creating a profile 2−12
moving 8−6
striped mirrorsets
planning 2−21
planning considerations 2−20
stripesets