HSG80 ACS Solution Software V8.6 for Compaq OpenVMS Installation and Configuration Guide

Planning a Subsystem 1–19
Use the CLI command,
SHOW THIS_CONTROLLER/OTHER_CONTROLLER to display the
subsystem’s worldwide name.
Restoring Worldwide Names (Node IDs)
If a situation occurs that requires you to restore the worldwide name, you can restore it
using the worldwide name and checksum printed on the sticker on the frame into which
the controller is inserted.
Figure 1–9 shows the placement of the worldwide name label for the Model 2200
enclosure, and Figure 1–10 for the BA370 enclosure.
Figure 1–9. Placement of the worldwide name label on the Model 2200 enclosure
1 Node ID
(Worldwide name)
2 Checksum
CXO7228A
WWN INFORMATION
P/N:
WWN:
Checksum:
NNNN – NNNN – NNNN – NNNN
NN
S/N:
1
2
1 Node ID
(Worldwide name)
2 Checksum
CXO6873B
WWN INFORMATION
P/N:
WWN:
Checksum:
NNNN – NNNN – NNNN – NNNN
NN
S/N:
1
2