HSG80 ACS Solution Software V8.6 for SGI IRIX Installation and Configuration Guide

Installing and Configuring the HS-Series Agent 4–5

Installing and Configuring the Agent

IMPORTANT: Copy the installation and configuration script to a temporary directory before

beginning this installation. For instructions, see Chapter 3.

The Agent will automatically start when you install it and will restart automatically if it

stops for any reason.

1. Log on to the host system as root (superuser). You must have access to the superuser

(root) account to perform this installation.

2. Change to the directory to which you copied the installation and configuration script

from the CD-ROM. For example, if you installed the installation and configuration

script to the /tmp/HSG directory, you would enter the following:

# cd /tmp/HSG80

3. To start the StorageWorks installation and configuration script, enter the following:

# ./stgwks_sgi.sh

The StorageWorks and Command Console Agent Installation and Configuration menu

appears.

4. To install the Agent, select option 3.

5. Follow the text-based prompts and enter the appropriate information.

NOTE: If you entered Y to start the Agent during the installation, the Agent starts. Its default is to

restart automatically after a system restart or if it stops for any reason.