HSG80 ACS Solution Software V8.6 for SGI IRIX Installation and Configuration Guide

4–6 HSG80 ACS Solution Software Version 8.6 for SGI Irix Installation and Configuration Guide
2. Change to the directory to which you copied the installation and configuration script
from the CD-ROM. For example, if you installed the installation and configuration
script to the /tmp/HSG directory, you would enter the following:
# cd /tmp/HSG80
3. To start the StorageWorks installation and configuration script, enter the following:
# ./stgwks_sgi.sh
The StorageWorks and Command Console Agent Installation and Configuration menu
appears.
4. To install the Agent, select option 3.
5. Follow the text-based prompts and enter the appropriate information.
NOTE: If you entered Y to start the Agent during the installation, the Agent starts. Its default is to
restart automatically after a system restart or if it stops for any reason.
6. To remove the temporary directory, enter the following:
# rm -r /tmp/HSG80
Table 4–3 Information Required for Install Program Prompts
Information Required to Complete Installation How to Respond
Target directory for installation /usr/stgwks is the directory where StorageWorks
will be installed. It contains the software copied in
Chapter 3. The directory must have a minimum of
4 MB of space available.
*Port that the Command Console Client uses to
communicate with the Command Console Agent
for RAID subsystem configuration and
maintenance.
*Default is 4998.
If the default port is already used, press N and
specify a new port.
*Port number that the Command Console Agent
uses to send notifications to the Command
Console Client.
*Default is 4999.
If the default port is already used, press N and
specify a new port.
The directory which contains the device special
files.
Irix device special files are located in the /dev/scsi
directory.
A password to gain access to the agent to
configure the RAID subsystem with the Client.
Enter a 4–16 character password. The install
program does not echo what you enter.
*The name of CC Agent manufacturer and the
Enterprise object identifier for use with its MIB, so
that it can operate with other SNMP applications.
*Enter Compaq Computer Corporation as the CC
Agent manufacturer.