HSG80 ACS Solution Software V8.6 for SGI IRIX Installation and Configuration Guide

6–4 HSG80 ACS Solution Software Version 8.6 for SGI Irix Installation and Configuration Guide

Figure 6–3. Example virtual system layout from the hosts’ point of view

Figure 6–4. Example virtual system layout from the hosts’ point of view

CLI Configuration Example

The series of commands and information presented in this section provides a CLI

configuration example. Text conventions used in this section are listed below:

■ Text in italics indicates an action you take.

■ Text in THIS FORMAT, indicates a command you type. Be certain to press Enter after each

command.

■ Text enclosed within a box, indicates information that is displayed by the CLI

interpreter.

■ NOTE text provides additional helpful information.

NOTE: “This” controller is top controller (A).

Plug serial cable from maintenance terminal into top controller.

CLEAR CLI

SET FAILOVER COPY=THIS

CLEAR CLI

"RED" "GREY" "BLUE"

D2 D101

D102

D120

CXO7110B

"PURPLE" "WHITE" "TAN"

D0 at LUN 0

D1 at LUN 1

D100 at LUN 0 D120 at LUN 0

CXO7297B