HSG80 ACS Solution Software V8.6 for SGI IRIX Installation and Configuration Guide

Configuration Example Using CLI 6–5
SET THIS SCSI_VERSION=SCSI-2
SET THIS PORT_1_TOPOLOGY=FABRIC
SET THIS PORT_2_TOPOLOGY=FABRIC
SET OTHER PORT_1_TOPOLOGY=FABRIC
SET OTHER PORT_2_TOPOLOGY=FABRIC
RESTART OTHER
RESTART THIS
SET THIS TIME=10-Mar-2001:12:30:34
RUN FRUTIL
Y
Plug serial cable from maintenance terminal into bottom controller.
NOTE: Bottom controller (B) becomes “this” controller.
RUN FRUTIL
Y
SET THIS MIRRORED_CACHE
NOTE: This command causes the controllers to restart.
SET THIS PROMPT=“HLNDR BOTTOM”
SET OTHER PROMPT=“HLNDR TOP”
SHOW THIS
SHOW OTHER
Plug in the Fibre Channel cable from the adapter in host “PURPLE.”
SHOW CONNECTIONS
RENAME !NEWCON00 PURPLE1A1
Do you intend to replace this controller's cache battery? Y/N [Y]
Do you intend to replace this controller's cache battery? Y/N [Y]
Connection
Name
Operating
System Controller Port Address Status
Unit
Offset
!NEWCON00 WNNT THIS 1 XXXXXX OL this 0
HOST_ID=XXXX-XXXX-XXXX-XXXX ADAPTER_ID=XXXX-XXXX-XXXX-XXXX