HSG80 ACS Solution Software V8.6 for SGI IRIX Installation and Configuration Guide

3–6 HSG80 ACS Solution Software Version 8.6 for SGI Irix Installation and Configuration Guide
Copying the File Archive from CD-ROM to Temporary
Storage
Before the installation script can run, copy the file archive that contains the StorageWorks
software for SGI-Irix from the CD-ROM to a temporary directory. The scripts can then be
executed.
1. Insert the StorageWorks software distribution CD-ROM into the drive.
2. Log in as root (superuser).
3. Change the directory to a temporary storage area (/tmp). For example:
# cd /tmp
4. Create a directory into which the file archive can be loaded.
# mkdir HSG80
5. Change to that directory.
# cd HSG80
6. If the SGI-Irix automounter does not mount the CD-ROM, use the following
command:
# mount -t iso9660 -r /dev/rdsk/dks0d7vol /mnt
NOTE: The name of dks0d7vol may be different on your system.
7. Extract the file archive from the CD-ROM by entering the following command:
# tar xvf /mnt/agent/sgi/stm_sgi.tar
All of the files necessary to complete the StorageWorks Software installation have now
been copied to this directory.
Executing the Installation Script
Perform the following procedure to install the StorageWorks software onto the system:
1. Enter the following command and press Enter.
# ./stgwks_sgi.sh
The installation options menu appears.
2. Choose option 1 to install StorageWorks Software. The Copyright Notice and the
following information will be displayed: