Manualshelf

HSG80 ACS Solution Software V8.6 for Windows NT and Windows 2000 Installation and Configuration Guide

ManualsBrandsHP ManualsStorageHP StorageWorks EMA16000 D14 (opal) Bundle
121122123124125126127128129130
Installing and Configuring the HS-Series Agent 4–5
2. Remove previous versions of the Agent from your computer.
3. Read the release notes.
4. If any of your shortcuts point to a floppy drive, a CD-ROM drive, or a removable drive,
verify that the floppy or CD-ROM drives are not empty and that the removable drive is
present. The installation will check the shortcuts on the desktop and in the Start menu.
The installation will check the shortcuts of all users for that computer, even if they are
not currently logged on.
Installing and Configuring the Agent
The Command Console Client Agent software is installed on your host system from the
StorageWorks Command Console Agent CD-ROM.
1. Insert the Solution Software CD-ROM into the host system. A menu appears on your
screen.
NOTE: If the program does not start automatically after inserting the CD-ROM, go to the
CD-ROM drive directory and click install.bat.
2. The installation program provides one primary option: Solution Software for ACS
version 8.6. If you are just installing SWCC, skip the driver upgrade screeen. Select
SWCC to install.
3. Click Next. Follow the instructions on the screen.
After the computer installs the software, you are asked if you want to configure the Agent.
4. Click Continue to configure your Agent. The Windows NT Agent Configuration Step
1 of 3 window appears.
5. Enter your password in the New field, and retype it in the Verification field. The
password must have 4 to 16 characters.
6. Click Next to continue. The following message appears:
Password Validation Successful.
7. Click OK to continue. The Windows NT Agent Configuration Step 2 of 3 window
appears.
8. In the Selected Client field, enter the name of the client system entry that you want to
receive updates from this Agent. In addition, adding a client system entry allows you
to access the agent system from the Navigation Tree on that client system. Choose
TCP/IP and/or SNMP for your notification scheme.