HSG80 ACS Solution Software V8.6 for Windows NT and Windows 2000 Installation and Configuration Guide

Installing and Configuring the HS-Series Agent 4–15
Disabling and Enabling the Agent Startup at System Boot
The default is for the Agent to start at system boot; however, you may want to change this
option. For example, if you need to check your system, you may not want the Agent to
start at system boot.
NOTE: If you want to enable the Agent to start at system boot, change the startup type to
automatic.
From Windows NT
1. Double click Services in Control Panel.
2. Double click Steam. The Service window appears.
3. Select Manual under Startup Type, and click OK.
From Windows 2000
1. Click Start > Settings > Control Panel > Administrative Tools > Component Services.
2. Under Console Root, select Services (Local).
3. Under Services (Local), right-click Steam.
4. From the drop-down menu, select Properties. The Steam (Local Computer) window
appears.
5. Under the General tab, select Manual from the Startup Type drop-down menu.
6. Click OK.
Removing the Agent
1. On Windows NT 4.0, double click the Add/ Remove Programs icon in the Control
Panel. The Add/Remove Program Properties window appears.
2. On Windows 2000, click Start > Settings > Control Panel > Add/Remove Programs.
The Add/ Remove Program window appears.
3. Select StorageWorks CC HS Series Agent in the window.
4. On Windows NT 4.0, click Add/Remove.
5. On Windows 2000, click Change/Remove.
6. Follow the instructions on the screen. The HS Series Agent is removed.