HSG80 ACS Solution Software V8.6 for Windows NT and Windows 2000 Installation and Configuration Guide

6–4 HSG80 ACS Solution Software Version 8.6 for Windows NT and Windows 2000 Installation and

Configuration Guide

Figure 6–3. Example virtual system layout from the hosts’ point of view

CLI Configuration Example

The series of commands and information presented in this section provides a CLI

configuration example. Text conventions used in this section are listed below:

■ Text in italics indicates an action you take.

■ Text in THIS FORMAT, indicates a command you type. Be certain to press Enter after each

command.

■ Text enclosed within a box, indicates information that is displayed by the CLI

interpreter.

■ NOTE text provides additional helpful information.

NOTE: “This” controller is top controller (A).

Plug serial cable from maintenance terminal into top controller.

CLEAR CLI

SET MULTIBUS COPY=THIS

CLEAR CLI

SET THIS SCSI_VERSION=SCSI-3

SET THIS PORT_1_TOPOLOGY=FABRIC

SET THIS PORT_2_TOPOLOGY=FABRIC

SET OTHER PORT_1_TOPOLOGY=FABRIC

SET OTHER PORT_2_TOPOLOGY=FABRIC

SET THIS ALLOCATION_CLASS=1

RESTART OTHER

"RED" "GREY" "BLUE"

D2 D101

D102

D120

CXO7110B