HSG80 ACS Solution Software V8.6 for Windows NT and Windows 2000 Installation and Configuration Guide

Installing, Configuring, and Removing the Client B–5
Adding the Storage Subsystem and its
Host to the Navigation Tree
The Navigation Tree enables you to manage storage over the network by using the Storage
Window. If you plan to use pager notification, you must add the storage subsystem to the
Navigation Tree.
1. Verify that you have properly installed and configured the HS-Series Agent on the
storage subsystem host.
2. Click Start > Programs > Command Console > StorageWorks Command Console.
Client displays the Navigation Window. The Navigation Window lets you monitor and
manage many storage subsystems over the network.
Figure B–1. Navigation window
3. Click File > Add System. The Add System window appears.
4. Type the host name or its TCP/IP address and click Apply.
5. Click Close.