HSG80 ACS Solution Software V8.6 for Windows NT and Windows 2000 Installation and Configuration Guide

Planning a Subsystem 1–29

■ Controller B, port 1—worldwide name + 1, for example 5000-1FE1-FF0C-EE01

■ Controller B, port 2—worldwide name + 2, for example 5000-1FE1-FF0C-EE02

■ Controller A, port 1—worldwide name + 3, for example 5000-1FE1-FF0C-EE03

■ Controller A, port 2—worldwide name + 4, for example 5000-1FE1-FF0C-EE04

Use the CLI command,

SHOW THIS_CONTROLLER/OTHER_CONTROLLER to display the

subsystem’s worldwide name.

Restoring Worldwide Names (Node IDs)

If a situation occurs that requires you to restore the worldwide name, you can restore it

using the worldwide name and checksum printed on the sticker on the frame into which

the controller is inserted.

Figure 1–15 shows the placement of the worldwide name label for the Model 2200

enclosure, and Figure 1–16 for the BA370 enclosure.

Figure 1–15. Placement of the worldwide name label on the Model 2200 enclosure

1 Node ID

(Worldwide name)

2 Checksum

CXO7228A

WWN INFORMATION

P/N:

WWN:

Checksum:

NNNN – NNNN – NNNN – NNNN

S/N: